|
Post by iansadler on May 21, 2011 9:05:22 GMT
Hi all, while in the pound shop I saw this tooth staining removal tool . It has a very fine abrasive tip to the handle. Brainway monent , Could it be used to add scratches to weathering on models . Since most cammo is more than one layer of paint and can be up to 4 with primer . I thought for a £1-00 why not give it a try . So here is the scan of the tool and I will report back after I have tried it in a selective piece of scrap I use to test my colours . It has so many layers . cheers ian
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 21, 2011 9:36:18 GMT
I hope you got me one ...
|
|
|
Post by iansadler on May 21, 2011 10:44:03 GMT
hi all a report on the use , in a word forget it , the paint is harder than the tip. All it did was wear away the tip and hardly a scratch on the paint. But not all is lost . I took the tip off and replaced it with a brass stud then added a new 003 paint brush ferrule to the stud and superglued in place. hey presto a right angled paint brush for all those out of reach and hard to get places . scan of new right angled brush to follow cheers ian
|
|
|
Post by iansadler on May 21, 2011 10:55:43 GMT
hi all see scan of the new right angled paint brush cheers ian
|
|