|
Post by semijoe on Oct 13, 2011 23:19:34 GMT
|
|
|
Post by semijoe on Oct 16, 2011 13:47:07 GMT
today i made a carrier bar. im assuming that what it is also paint the floor/fenders
|
|
|
Post by semijoe on Oct 16, 2011 21:19:22 GMT
radiator is painted, next is the plumbing
|
|
|
Post by semijoe on Oct 17, 2011 19:44:52 GMT
had a early day from work so i jumped right on this ive install the esc / speed controller for the motor also made an air cleaning and filter for the carb plumbing is installed and painted
|
|
|
Post by semijoe on Oct 19, 2011 21:13:38 GMT
i was looking at some pictures of the driver side and noticed a steering box. my steering is on the other side so for more detail, i made one today. the mount is alum and the steering box is round styrene without any measurements in front of me, i guessed the size. but i think i have it right
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 19, 2011 21:16:10 GMT
This build is really coming alive now Joe, enjoying every episode.
|
|
|
Post by semijoe on Oct 20, 2011 13:39:19 GMT
i paint the steering box and the rear sub frame also made 4 pull rings , there is one located in between each wheel on the chassis
|
|
|
Post by colinburgess on Oct 24, 2011 15:00:16 GMT
Hi Joe, lookin' good, I like your work, chunky and workman like. Thanks for sharing your project with us.
Colin
|
|
|
Post by semijoe on Oct 27, 2011 23:01:45 GMT
i started on the roll cage for the engine compartment. i went aliitle way on this part also made a small utility box next to the fuel tank.
|
|
|
Post by semijoe on Oct 28, 2011 18:17:13 GMT
on the passenger side is a spare tire and mini boom i made one from styrene, everything on it works. both pullies, crank and the boom turns outward i need find some kind of string for it with a hook. next is a stand for the tire
|
|
|
Post by semijoe on Oct 28, 2011 21:59:47 GMT
|
|
|
Post by semijoe on Nov 2, 2011 23:10:50 GMT
on the driver side top fender, is something that looks like a oil reserve, not sure any way, i made the base for it that mounts to the fender and seperately the tank
|
|
|
Post by semijoe on Nov 3, 2011 23:34:32 GMT
trans cover is in the oil reserves done. i move it to the front of the fender due to the engine exhaust, dont need an explosion also made a tool box
|
|
|
Post by semijoe on Nov 4, 2011 21:07:41 GMT
the tank has a weird shape to it. so what i did was buy some 4 inch pvc piping,cut in half and added 90mm to the center part 450mm long x 210mm wide and 112mm high i figure i show you what i have to do to build this part
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 4, 2011 21:23:01 GMT
Joe, loving the progress of this build!
|
|