|
Post by hazmod on Mar 30, 2013 11:07:47 GMT
I have an good idea, more weight nuts or discard white metals pieces put in nose cones or front fuselage for modern military aircrafts. I have fixed more small white metal pieces in cockpit interior with my 1/72 Scale, Westland Gazelle after poor balance down and scale and I finished my Gazelle, and good scale with weight. I have fixed discard cycle nut in front fuselage from my Buccaneer S2.B, with aftermarket pieces with no problem. used discard nuts in nose cone or front fuselage, and I checked scale of model fuselage. good result my confidential Good balance, best White metals pieces, Discard cycle nuts Not enough more weight for ball bearing light than cycle nuts I used fixed my sport cycle and I throw discard nuts in my toolbox. I made my good idea I done it, I has put nut in F16 Fighting Falcon with nose cone. good result and more sense Attachments:
|
|
|
Post by hazmod on Oct 5, 2013 8:16:05 GMT
I has put more nuts inside my Airfix 1/72 scale, FMA Pucara with very heavy tail wings. I filled two nuts with ball bearing inside fuselage, and engine covered with two nuts. I'm confidential this, Watch! I have checked balance with Pucara for scale test, I hope it It was no good ball bearings inside this Pucara, it was caused heavy from tail fin wings. I'm focused it
|
|