|
Post by hazmod on Aug 10, 2013 11:21:54 GMT
I has views Tom Cleaver's Hurricane Mk IIC Air race, on first image appeared this thread, from website online. and It was wrong colour with Royal Blue all over and Propeller cap with yellow, , It was instruction sheet from Lifelike, and It was wrong colour code and confused it. I brought my Hasegawa 1/48 Scale, Hawker Hurricane Mk IIC kit with clear discount price on last May, from Model Zone. I has reads instruction sheet with colour code but wrong colour. I was views history to Hurricane with instruction, and It was says "Bright Blue" I has trail and fit the fuselage, on previous Spitfires, I will cockpit set inside this fuselage, because I was sprayed it on before. I will no bother it I brought Tamiya TS 44 brilliant blue aerosol from Steve Webb, Model Shop in Frodsham. I'm confidential it. I left half of two TS 44 Aerosols in store. I sprayed it with fine grey primer aerosol, till overnight. I checked dirt and fibres on surface from primer, and flat it. I has sprayed all pieces with Brilliant blue colour on Yesterday (August 9th 2013) I will left all pieces on three or four weeks. I has order my accessories from Hannants on today Should be correct colour Bright Blue, and Propeller Cap with Gold colour, because Queen Elizabeth II's sister. I has sprayed Propeller blades with matt black with primer aerosol on August 11st 2013 You will checked this box, and instruction sheet from Hasegawa. I will building my next Hurricane on further, and looked nice bright blue Hurricane at SMW I will choose 99 version air race
|
|
|
Post by hazmod on Aug 29, 2013 10:53:00 GMT
I has repaired front fuselage with re sprayed after defected it. It was defected flat marks and scratched on surfaced. and I has flat and polished the large wings. I will leave front fuselage on shelf until two weeks. I has cut off canopy split pieces
I will ready it on until three weeks. keep my chin up
|
|
|
Post by hazmod on Aug 31, 2013 7:04:45 GMT
I'm situation over quality paint on surface, and spot hidden primer fibres around fuselage, should be flat it on before DOH!, I flat it with wet 800 sandpaper crushed fibres away. I have re sprayed three pieces of Hurricane with TS - 44 brilliant blue, as I do n't mind about cost it. I has bought last brilliant blue aerosol with clearance price from Model Zone on Yesterday.
It will be important, quality paint on surface, and looked this defect, hidden fibres from primer and dirt. I always checked this defects on panels on every times.
My hurricane fuselage will rest on shelf on more three weeks, until hard surface paint.
If You will rush build model aircraft with gloss paint, be caused soft surface paint, fingerprints, and wet paint damage until more two weeks. I used rest of models with gloss paints on boxes on top of shelf on several weeks and my backlog orders.
Update on August 31st 2013
|
|
|
Post by hazmod on Sept 1, 2013 12:55:37 GMT
I have remove all pieces from holders after sprayed until overnight, and I'm condential this quality paint surface and more bright gloss. It was better quality paints. I put three pieces on box on shelf for rest. When it will hard surface on three weeks. Do n't bother this
Update on September 1st 2013
|
|
|
Post by hazmod on Sept 7, 2013 10:28:11 GMT
I cut off canopy for separately. I will repaired canopy with polished after scratches. I made jewellery wire for Left side Handle on canopy. I will sprayed it with grey primer and brilliant blue with canopy and intake anti icing device guard piece photo etches.I have focused it. I will ready make this cockpit build with Eduard photo etches on now I was put all masks on canopy, and covered inside masks because prevent overspray and ready sprayed it with grey primer. I has sprayed all pieces with Brilliant Blue on two coats times and sprayed in jar for touch up I will remove all masks with canopy on two days Update on September 7th 2013
|
|
|
Post by hazmod on Sept 9, 2013 19:16:27 GMT
I have remove all masks from canopy on today, After sprayed it on two days ago. Do n't bother, I will repaired it and painted touch up with frames. I leave canopy in box on shelf, until hard surface paint. I was sprayed canopy with masks on first time. I still leave my Hurricane Mk IIC kit on the box on shelf and I keep chin up and very patient
Update on September 9th 2013
|
|
|
Post by hazmod on Sept 20, 2013 17:38:05 GMT
I ready build my Hurricane Air Racer on now, After I finished my Wallis WA 116 Army Autogyro. I still painted the pieces. I will fixed the compass with eduard photo etches. It was good recommended with Eduard as unlike Hasegawa cockpit dashboard decal. I will put Eduard P/E pieces with an original parts. I has fitted fuselage married front fuselage covers with PVC. Won't ruined the paint surface, I told you so I forgot undercarriage tray left without wings on three weeks, but I won't bother this. I has fitted tray into wing on now. I will kept steady it Update on September 20th 2013 Attachments:
|
|
|
Post by hazmod on Sept 22, 2013 9:33:39 GMT
I still painted the cockpit as my problem, I has drill in access to seat harness with seat bucket, I used drill in access to seat harness with racing seat. I will looking forward my second Air Racer kit. I was painted oil cooler radiator with matt Alum paint on Yesterday. Today, I put matt black to oil cooler with cotton swab wipe off. It was real looked this oil cooler, Where is I used made all radiators with all weather and strains with my racing cars. I pricked with cocktail pin into exhausts outlets with Tamiya Matt Black. When I finished this cockpit assembly, until final assembly on few days more Update to September 22nd 2013,This Morning Attachments:
|
|
|
Post by hazmod on Sept 23, 2013 13:09:37 GMT
I'm frustrated with small parts with photo etches on continued. I has sprayed the compass device with Matt black with Tamiya aerosol. I still steady made it. I still ironic with my problem for cockpit build with photo etches on continued
Update on September 23th 2013
|
|
|
Post by hazmod on Sept 24, 2013 11:59:32 GMT
I'm felt works with small photo etches pieces for cockpit and I can repaired with touch up with photo etches with perpainted after chipped off paint, and I painted knobs with satin black paint I used made my 1/43 scale, Racing cars with photo etches with seat harness photo etches, and I will fixed seat harness with seat on further
I made anti ice guard mesh device photo etch with carburettor intake duct, but I made my mistake as no matter, all right
I have repaired and painted canopy after remove masks.
I will fixed all and repaired it.
Update to September 24th 2013, on Evening
|
|
|
Post by hazmod on Sept 25, 2013 14:22:28 GMT
I have order to new resin wheels for Hannants on today, I have mind it. I have wipe off excuss matt black for shadow edges wings flips with cotton swab and small polish with tissue and smooth wipe off it. I still made cockpit with more photo etches with pieces, and I kept steady I do n't looking this plastic wheels for competition as I'm judging it I still repaired front canopy with re painted edges. I still make both models on continued Hurricane air racer was bold and more power with 12 exhausts outlet fire out! I kept works with Hurricane's build on continued Update on September 25th,Afternoon I still remained photo etches pieces for cockpit on few days I painted an undercarriage arms with metal cote matt Alum I have remained build with seat with harness photo etches Update on September 25th 2013, evening I way to work on last nightshift with murder to night on tonight, I has released last images from workshop, 26/09/2013 Attachments:
|
|
|
Post by hazmod on Sept 26, 2013 18:50:12 GMT
I have finished this cockpit with build but my problem over compass close by control column, and I will sort it I made flash metal foils with landing light heads with clear paint drips on this pieces. I still works my Hurricane air racer on this weekend Update on September 26th, late evening I have released last images on now
|
|
|
Post by hazmod on Sept 27, 2013 18:31:37 GMT
I have finished cockpit assembly on final on today, and I put this cockpit into fuselage, but no comfortable it, and I careful remove from covered from fuselage. I made put cockpit inside it, and re fitted covered with fuselage, no problem I has made massive photo etches pieces for cockpit on since my 1/48 scale, Sea Harrier FA 2 I still frustrated with flash metal foils for inside landing light housing with wing, and I made it I kept steady it I will plan fixed flash metal foils for both navigation light housings on further I will waiting for resin wheels accessory from Hannants on tomorrow. Update on September 27th 2013, evening Released to images for final finish with cockpit with fuselage on today
|
|
|
Post by hazmod on Sept 29, 2013 0:45:02 GMT
I was situation it, I discovered left pedal broken from cockpit on floor. I no bother it. I has remove again the fuselage from covered. I has fixed left pedal on cockpit back. I has re fitted cockpit inside fuselage, as I checked it and re fitted with covered with PVC Klear. I'm confidential it One lost piece for defect. Sigh!. I has repaired and re sprayed propeller blade on Yesterday. It was defected with saggy run. Now, clear to defected away with blade. I has fitted landing lights and covered into wing, and I took 1/43 scale, racing sports car's piece of len, as I left it on used pieces in boxes. I fit red len into identity light under wing panel, Beauty it! I has split gold stripes with ID serial number for two stripes on side fuselage, no problem. I will find rear navigation light with tailfin, for clear len from littlecar lens on further. I brought my true design resin tyres from Hannants on Yesterday, It was right, as saggy tyres rest on, and an original tyres from Hasegawa, with no saggy tyres, What judges will views it, Hush! I has frustrated my one of models for competition as fixed again on yesterday. I will put gold stripes with serial number decal split on RH side fuselage on later I always steady it on continued I will fixed last flash metal foil inside with navigation lights with wing on later I'm confidential it Update on September 28th 2013, on later midnight, and I will report it on later Released three images on now, and Update on September 29th, Morning
|
|
|
Post by hazmod on Sept 29, 2013 14:47:04 GMT
I made flash metal foil for navigation light covered with wing, and I drill in clear navigation light inside, and drip in with clear green and red in the clear's hole, and flat it for excuss paint. I painted rubber tires with humbrol 67 and 33 mixed colour for resin wheels. I will find this brake lines for undercarriage panel on further Update on September 29th, Afternoon 1, Show this stripe decal on left side fuselage on last night 2, Show landing light inside wing with clear paint headlight 3, fitting clear covered with landing light and fit flash metal foil for navigation light covered
|
|