|
|
Post by hazmod on Oct 14, 2013 4:56:10 GMT
I sprayed first metallic silver on roof on before. After finished this job with roof. I painted all body with satin black with hand paint, like satin carbon fibres effect. I has painted all carbon fibre paint with chassis, cockpit and air intake boxes. I was made all carbon fibre decals for my Opel Astra Coupe DTM on previous build. I will no ready build it, After finished my 1/12 Scale, Ferrari 312T-75 on few days. Watch!  Attachments:
|
|
|
|
Post by hazmod on Oct 15, 2013 19:00:35 GMT
I has finished this paint job for Carbon fibre effect with chassis and cockpit, looks like real fine carbon fibres surface. I will put carbon fibre decals around this chassis on further. I has painted this body shell inside with carbon fibre paint. Save my cost down with mirco sol and carbon fibre decals on further. Cheapest carbon fibre surface with Audi Sportline. You look this very smart black all over body shell and bonnet made carbon fibre surface body. different matt black with Bruno Spengler's BMW M3 DTM -12 body shell. I used put carbon fibre decals with my Opel Astra coupe's cockpit and chassis on last DTM car on last year, as I has hard work with massive carbon fibre decals with last DTM car. I will not ready build my car on further I can't wait this Audi A4 build on yet! |
|
|
|
Post by hazmod on Oct 17, 2013 4:52:03 GMT
I will ready build my Audi A4 DTM on next week, as I still painted more carbon fibre paint with more intake and outtake boxes on this week
I will reads model magazines over Audi A4-09 DTM
I still frustrated to work on today
|
|
|
|
Post by hazmod on Oct 18, 2013 8:44:34 GMT
I'm ready build and painted all pieces and make more CF decals for wings, and protected doors trim on now
I have finished my body shell and bonnet without decal on now
Still be doubt this Audi A4 at Scale Model World 2013
|
|
|
|
Post by hazmod on Oct 19, 2013 20:27:42 GMT
Finished all wheels, and finished all pieces with carbon fibre paint. I has painted all pieces with carbon fibre paint with cooling tubes (B79-B80) and I has drilled in both tubes, before painted it. I has checked my instruction with carbon fibre details. I used copy with Astra Coupe's instruction with identity colour. I painted this seat with harness with satin black and matt red colour, because It was gloss harness decal. I will make it with painted this seat harness. I still make massive CF decals with chassis spoiler, and fins, exhaust silence pipes, and rollover panels. 1, Coarse Carbon Fibre protection door trims panel 2, painted this seat 3, CF with Gold effects decals with pieces Update on October 19th 2013, late evening |
|
|
|
Post by hazmod on Oct 20, 2013 16:46:13 GMT
I felt build all CF decals for front spoiler and rear fins with body work, and I still make coarse CF decal for exhaust silences on now
I like build my Tamiya DTM cars, because it was good quality and build. But I felt build my first Revell 1/24 scale, Audi A4-09 on now.
I will looking forward next DTM car with BMW on further
Sigh!
Update on October 20th 2013, early evening
|
|
|
|
Post by hazmod on Oct 21, 2013 11:39:02 GMT
I have finished side exhaust silences with coarse CF decals, I'm problem with front windscreen for fit by body shell as not right fit it. I still build more CF Decals for chassis and wings, on continued. I will not working to nightshift, Hooray!  1, Side Exhaust silence with coarse carbon fibre covered 2, Nearly finished Audi V8 Engine 3, Rear aerofoils with Carbon Fibres decals for rear body -fins Update on October 21 2013, late morning |
|
|
|
Post by hazmod on Oct 22, 2013 18:05:03 GMT
I has finished chassis floor with carbon fibres decals build on today, and I painted Tamiya Smoke on carbon fibres, and leave it on overnight. I has views carbon fibre from cars forum on previous forum. I see I still hard work with massive C/F decals with pieces. I has done with rear aerofoil with hook stays with decal. I has frustrated with terrible windscreen fit, and put small super glue on edges of windscreen I still works with more C/F decals on continued. 1, Finished classis floor with kelvar and C/F decal with covered smoke paint 2, Intake cooling tubes with C/F paint 3, Rear Aero foils with all C/F decals with Hook stays with C/F decals Update on October 22 2013, evening |
|
|
|
Post by hazmod on Oct 23, 2013 18:21:10 GMT
I still no finished made all C/F decals with four pieces on now, Sigh! I has problem with rear aerofoil with C/F decals with debris of clear decals edges, and more clean out of it. I has put engine and gearbox on chassis. Wrong decal for side outlet exhaust panels. I should cut off this decals. Shameful Revell I'm no fan of Revell because It still terrible model cars. I like Tamiya DTM Cars because Tamiya were better than Revell I will sort of this aero foils on further. Revell DTM Audi was no good quality 1, Final finished Chassis floor with C/F decals and paint 2, Final assembly V8 engine with titanium silver exhaust pipes 3, Side exhaust panels with Kelvar and C/F decal inside Update on October 23th 2013, evening |
|
|
|
Post by hazmod on Oct 23, 2013 22:57:28 GMT
If you will buy Revell DTM car kit on further, as You will situation this decal problem with body work, I was situation with stripe decal problem without covered. I put intake on chassis with side panels, and I put decal on side and need gently press and gently and smooth cut this edges of decals from separte body work and still treats with micro sol on continued. I checked separte decals from body work. I keep gently press and smooth with decal from body. Lot of problem with this decals from Revell You will checked the box with photo - images or model magazines I has fixed side stripe decals with side panels with intake panels, and smooth cut off this decal with mirco sol treatments with cheapest cotton swabs, and do n't bother I can make with touch up paint with decal's gap edges. I do n't like Revell model car with assembly and terrible, but no recommended decals without separate or cut off. Good recommended with Tamiya, model cars 1, This stripe decal on water on my dish, without separate 2, Before, trailed on bodywork with panels, and fixed decals 3, After decal fixed, cut off edges from side panels and get touch up paints job Update on October 23 th, nearly midnight and update with our image released on here on this morning |
|
|
|
Post by hazmod on Oct 24, 2013 18:10:31 GMT
After touch up paint with side panels. I still remained one piece of C/F decal on now. I has fixed photo etch towing ring to rear diffuser. German Marshall can't find this towing ring inside diffuser, and moulded ring on rear diffuser still inside covered by photo etch towing ring. I made all C/F decals for steering with dashboard with arms. I has fitted it on cockpit on now with white PVA because no harmful with decal and paint, as let dry it. I made two rear fins with C/F with smoke in rear aero panels on yesterday. I keep steady and relax it Last Morning, I has fixed stripes on body work and bonnet secured and fixed decal on with mirco sol treatment until dry and smooth surface for cut off edges from decals Should be my Audi A4-09 DTM will finished on this weekend I still no finished it on continued 1, No finished this cockpit assembly 2, Rear side panel with fins 3, Looked smoke Carbon Fibre decal covered on bottom of rear large fins Update on October 24th 2013, Evening |
|
|
|
Post by hazmod on Oct 25, 2013 16:15:10 GMT
I has finished C/F decals for last piece on Yesterday. I still remained my Audi A4 -09,on now. I has finished fixed all decals with bodywork and bonnet. I has put another towing ring for front spoiler on further and do n't bother Side view camera housing, Ah!, It should be carbon fibre housing because C/F camera housing light than Alum camera I do n't looked this terrible spot of decals with body, as Revell's fault. I has wrestling with C/F with steel rollover cages insert in cockpit, as I'm frustrated it 1, Final assembly with Chassis and cockpit 2, Looked this cockpit with details 3, Towing ring insert with rear diffuser with C/F paint surface Update on October 25th 2013, late afternoon |
|
|
|
Post by hazmod on Oct 25, 2013 18:47:46 GMT
After final bodywork has married with chassis and I has take to notice this body as not right fit. I think rollover cage''s caused discomfort with roof inside. It was not right fit to small pins from rollover cages but not enough insert to hole from cockpit. I has remove rollover cage from cockpit, and reduced C/F fence and new brass rods fits all rollover cages as enough insert to hole with long pins.
I'm situation over not right body with chassis
Why I do n't like Revell model cars because it was crappy moulded and lack to designed with no right assembly it.
I'm very frustrated with my problem with fits moulded pieces like crappy
Off his Revell's chest!
Update on October 25th 2013, late evening
|
|
|
|
Post by hazmod on Oct 26, 2013 7:38:24 GMT
I will give my idea over secured with body work with cockpit floor for small screws, where is I used fixed small screws inserts with body work and chassis with pieces with Revell, on previous builds (Ferrari F2002, Chevrolet Corvette C5R, and C6R)
I have trailed new brass rods for rollover cages insert cockpit assembly, and re sealed inside cockpit with front bulkhead with PVA with superglue, prevent to breaking it.
I have drill in four holes with cockpit and bodywork's protected doors trim on before I will being build again it on further.
I will re fixed with decal for rollover fences with C/F decals.
I will getting off Revell's chest!
I can't excit watching last DTM highlight on digital TV on this morning, what happened to race, on last weekend
I will worked my Audi A4 with massive problem
Update on October 26th, morning
|
|
|
|
Post by hazmod on Oct 26, 2013 15:05:43 GMT
I has mend and re assembly rollover cages and cockpit after problem with caused it. I has fixed brass rods with rollover cages pins, as long pins can fit insert. I has fixed bodywork insert with cockpit with small screws. and I do n't look this. I know crappy assembly with this model car. After assembly with bodywork on chassis. I do n't look again this. I'm re views model magazines about Audi A4 -09. I'm very felt it I'm always situation this problem with rear panels lacks of body work, as do n't look this  I do n't agreed with Revell over quality model, turn Freddy Revell called Nightmare of Kraut St, 1, Rollover cages with brass rods replaced plastic pins. 2, Re assembly rollover cages with cockpit 3, Final assembly with body shell with cockpit Update on October 26th 2013, Afternoon |
|
