|
|
Post by hazmod on Nov 3, 2013 14:24:09 GMT
I brought my Peugeot 307CC kit from Art and Craft Studio on before ceased the trade on November 2007, He will offered me 50% off with my Peugeot kit Normal price £29.99 on 2005 to 2009. I bought it for £14.99. Sadly Arts and craft studio was gone and replaced from Model Zone at same retail shop. I sprayed bodywork with bright red aerosol from Tamiya. I painted white stripes for lower sills and bumpers with gloss white with hand paint. This is Arsenal colour!  I has repaired the bodywork for defected with dirt and get touch up it I sprayed die cast floor with Humbrol Ferrari red aerosol, and I painted C/F paint for under tray on two times with straight hand paint and metallic grey with hand paint. I will sort Kevlar decal on under floor I brought my three different logos and bar code mark decals, and Tamiya P/E set. I will no ready build my Peugeot 307 CC on yet, and I still painted more pieces on continued French Arsenal was supported with this colour, Attachments:
|
|
|
|
Post by hazmod on Nov 7, 2013 11:38:41 GMT
I still make die cast floor with chassis and suspension assembly, as I'm ceased build it on now, I need fixed my two repaired bodywork's oldest job on today, I lost two Ferrari F 1 cars on last weekend. I'm confidential it I keep build this Peugeot on further Released my image from my iPad camera, but no good picture |
|
|
|
Post by hazmod on Nov 9, 2013 14:55:58 GMT
I have re sprayed for spot on repair to rear bumper, it was knocked! I'm frustrated it
Curse to French, :-L
Badly treat with this decal with micro set, it was torn off decal, :-L
|
|
|
|
Post by hazmod on Nov 15, 2013 19:16:44 GMT
I has repaired my model body shell for spot on repair, and white stripe decal was ruined and make paint with white stripes with masking tape, no more decals stripes because It will discontinued production on further. I will able repaired and make it I was illness and I stop build it on one week on later I will build it on later on this Month Curse to French Gunners I not fan of Arsenal but my partner was fan of Gunners, puke  |
|
|
|
Post by hazmod on Nov 17, 2013 11:34:35 GMT
I has fixed the white stripe on side body, like Arsenal colour I has repaired with touch up white with decals torn off, no problem B***dy Arsenal with white stripes with red Attachments:
|
|
|
|
Post by hazmod on Nov 17, 2013 15:51:30 GMT
After finished it, I has fixed Renaissance bar code decals for side body and bonnet with used solvaset decal treatment and I has tried this decal with solvaset but very careful smooth the surface on door handles and If I used get micro set decal treatment with French decal and no good works. Solvaset decal treatment was good quick and soft surface it. Renaissance decal manufactures has recognised Daco decal treatment and he told me. I never used treat with French decal with solvaset on first time, wow! I will checked WRC rally 2005 DVD for reference with Monte Carlo rally 2005 on later No longer to Arsenal colour on now Attachments:
|
|
|
|
Post by hazmod on Nov 19, 2013 14:50:04 GMT
I has checked my WRC 2005 DVD for reference over Monte Carlo WRC 2005. It was evidence real action. Bar code logos not used with both bumpers and rear aero foil fence outside. I' m careful check it. Car modellers who has fixed all bar code logos with bumpers, for crazy modeller decal but it was wrong. Our renaissance agent was right pictures with 307CC with Monte Carlo version 2005, with three large bar code logos appeared this car. I know crazy modeller decal was not correct You will checked this version with Monte Carlo WRC 2005,with details and references. I has looked Renaissance decals with details as followed other WRC events. Should you will views WRC 2005 DVD with DTV with your remote control for play and pause on every times. I can't take wrong foot for pedal, all right Sutton Coldfield modeller has had show his Peugeot. 307CC at South Cheshire Model Miltaire Show 2008 and wrong bar code logos appeared all bumpers and aero foil fence with Wales rally GB 2005 version, See Peugeot 307 CC reference and details for news and chat to F-1 and Motorsport Sig forum on here Attachments:
|
|
|
|
Post by hazmod on Nov 22, 2013 10:16:56 GMT
I hit out of problem with carbon fibre - Kevlar decals for seat buckets from Tamiya, and it was disaster torn off both decal solutions and I have replaced an other fantasy print shop decal, no problem and I has break wiper arm, as I fixed it with covered photo etches arms, no problem  I will build it on few days on further. Update on November 22 2013 |
|
|
|
Post by hazmod on Nov 27, 2013 12:22:27 GMT
I still no finished my Peugeot on continued until finished my Ferrari Modena 360 Spider on last night. I will ready build this kit. It was cost me for repaired wiper with broken with arms, and mend it with strong thin photo etches arms. I'm confidential it and more cost me at lost C/F, Kelvar decal from Tamiya, torn off and stick wrecked decal, and replaced Fantasy printshop decal for both seat buckets. no more replaced it from Tamiya supplied because Peugeot 307 CC kits will remained. I will fixed kelvar foot rest and driver's foot rest on further Update on November 27th 2013 Attachments:
|
|
|
|
Post by hazmod on Dec 4, 2013 19:04:26 GMT
After I finished my Ferrari Modena Spyder on last Week. I still made Kelvar foot rests, and more C/F decals with more pieces on continued I still no finished my 307 CC on continued. I has frustrated fixed red stripes for seat harness belts with Tamiya P/E parts,  I will make up my 307CC on this weekend Update on December 4th 2013, Evening |
|
|
|
Post by hazmod on Dec 7, 2013 9:39:43 GMT
I has finished C/F decals for Steering wheel and gear levers devices. I still remained build this car on now on today.And I has assembly with cockpit with rollover cages. I will frustrated rear seat harness inside cages and Phew!, I has done with harness with rear cages. I has released three images with chassis on last morning Update to December 7th 2013 |
|
|
|
Post by hazmod on Dec 7, 2013 16:02:39 GMT
Curse to French ! I have frustrated and wrestled with bodywork with die cast floor, but no good secured it. And I frustrated fixed Yellow label with Pirelli logo with both bumpers, with no good micro set and I has tried bit of drip this decal with solvaset, and smooth flicked it with cotton swabs. I will remained build this 307 CC I has fixed door handles on door as smart decal logo with this image I will shot iron wolf down, lol! I do n't like die cast floor with bodywork, puke! Update to December 7th, late Afternoon Attachments:
|
|
|
|
Post by hazmod on Dec 7, 2013 19:49:36 GMT
After assembly with bodywork married with chassis and still frustrated it. lack of assembly with die cast floor and bodywork I has finished my model Peugeot 307 CC on last evening, Hooray! I looked my Peugeot 307 CC like cute red bodywork! I have my Peugeot Rally with three Monte Carlo Rally versions on cabinet display. My Peugeot 307 CC WRC 05 with Bar Code logo for Monte Carlo Rally 2005. Before this Peugeot 307 CC WRC -05s was displayed with Marlboro logo on test at outside Monaco. Good, = All plastic moulded pieces, nice headlights, Thumb down, Die cast Floor panel, and Photo etches set with seat harness from Tamiya Hide Arsenal colour with French car, my Partner will spank my ####!  |
|
