|
|
Post by Fatty on Jul 5, 2007 21:00:46 GMT
It seems that Im drifting towards cars..... Heres another Ive started. Its a 1/24 Tommy Kaira R R33 Nissan Skyline but I dont know who the kit manufacture is. I plan to change the wheels to a "double" five spoke, painting them in a chrome/silver colour. Ive cut out the front grille and meshed it, added a larger tip to the exhaust, and then the car is to be a high gloss black.       |
|
|
|
Post by sanguin on Jul 5, 2007 21:14:29 GMT
I plan to change the wheels to a "double" five spoke, painting them in a chrome/silver colour. Ive cut out the front grille and meshed it, added a larger tip to the exhaust, and then the car is to be a high gloss black. Have you considered a 'Berlin Urban' colourscheme? The RSM has his own battlewagon! John |
|
|
|
Post by Fatty on Jul 6, 2007 6:57:39 GMT
I plan to change the wheels to a "double" five spoke, painting them in a chrome/silver colour. Ive cut out the front grille and meshed it, added a larger tip to the exhaust, and then the car is to be a high gloss black. Have you considered a 'Berlin Urban' colourscheme? The RSM has his own battlewagon! John This is gonna be a practice run for the high gloss paint with my air brush before i start the Tamiya Mclaren slr  I think spike has his transport in the form of a VW campa ;D ;D ;D |
|
|
|
Post by The Hooded Claw on Jul 6, 2007 8:21:50 GMT
|
|
|
|
Post by Fatty on Jul 6, 2007 8:33:55 GMT
hmmmmmm sweet ;D although I have already bought all the other etch detail kits .....  |
|
|
|
Post by The Hooded Claw on Jul 6, 2007 8:57:30 GMT
Solved that:
I bought another base kit. ;D
Gonna use the Crazy Modeller set on my straight build and the KA set on the second.
H
|
|
|
|
Post by spike on Jul 7, 2007 9:34:34 GMT
With that detail set and lights the SLR should look Cooooool  . But the 1/24 1/24 Kaira is looking good so far. |
|
|
|
Post by Fatty on Jul 14, 2007 14:22:45 GMT
Ok change of plan..... I had painted the car in gloss black and the finish was terrible  so after much sanding and a bit of masking it is now a different colour....    |
|
|
|
Post by Fatty on Jul 14, 2007 16:34:29 GMT
All done. Once the paint has hardened over the next few days then I shall polish it all up....    |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 14, 2007 17:05:00 GMT
Nice build Paul, so that's what you wanted the aluminium pipe for?
|
|
|
|
Post by Fatty on Jul 14, 2007 17:09:36 GMT
Nice build Paul, so that's what you wanted the aluminium pipe for? I got the cutter to work in the end, what i was doing was tightening it up to much.... |
|
|
|
Post by spike on Jul 15, 2007 11:24:31 GMT
Not bad |
|
. But the 1/24 1/24 Kaira is looking good so far.
