|
|
Post by iansadler on Mar 4, 2008 13:36:27 GMT
Hi all , sometimes a single photo inspires you to build the unusual . So it was with a factory photo of the frame used to form the mould for casting T 34 turrets . I decided to build one along with a turret that had been cast , this had to include the casting lugs . I made the frame from sizing up and scratchbuilding it from plastic card and U channel . see photo one cheers ian  |
|
|
|
Post by iansadler on Mar 4, 2008 13:38:57 GMT
Hi all , I am unable to post the original as it it copyrighted , but here is the second photo of the frame cheers ian  |
|
|
|
Post by Don Cabriolet on Mar 4, 2008 19:16:45 GMT
An intriguing model Ian!
As you know I'm very interested in anything T-34. Not seen the original photo of this one- can you let me know which book it's in please?
Look forward to seeing the finished item too. Mix of rust tones and oiled metal for the finish..? Nice chocolate brown if it's got a lot of Manganese in it, any clues as to the composition of the mould?
|
|
|
|
Post by iansadler on Mar 4, 2008 19:50:01 GMT
hi Howard the frame is made from metal U shaped channel welded and bolted together , I need to add the bolts to the bottom plate and a venting tube for the hot gases to escape , then it is on to the painting stage . cheers ian
|
|
